EX04-SLPR40
Ex mb LED Driver
EX04-SLPR40 series is a 40W AC/DC LED driver featuring constant current output.EX04-SLPR40 operates from 90–264Vac with different rated output voltages ranging between 24V and 42Vdc. Thanks to the high efficiency up to 89%, with the fanless design, the entire series can operate at -40℃~+70℃ case temperature under free air convection. The entire series is rated at lP66 ingress protection level and is suitable for a variety of applications at dry, damp or wet locations
E-mail:
Key words:
- Constant Current mode output
- Plastic housing with Class ll design
- lP66 rating for indoor or outdoor installations
- Typical lifetime>50000 hours
- 5 years warranty
Standard Specification
| MODEL | EX04-SLPR40-42M | EX04-SLPR20-42M | |
| INPUT | Voltage Range | 100 ~ 240Vac (90-264Vac) | 100 ~ 240Vac (90-264Vac) |
| 140 ~ 250Vdc | 140 ~ 250Vdc | ||
| Frequency Range | 50/60Hz(47~63Hz) | 50/60Hz(47~63Hz) | |
| Power Efficiency | 87.0%@120Vac full load | 85.0%@120Vac full load | |
| 89.0%@230Vac full load | 86.0%@230Vac full load | ||
| Power Factor | >0.9@120Vac/60Hz(15-100 %) full load | >0.9@120Vac/60Hz(15-100 %) full load | |
| >0.9@230Vac/50Hz(60-100 %) full load | >0.9@230Vac/50Hz(60-100 %) full load | ||
| Total Harmonic Distortion | <20%@120Vac(30-100 %) full load | <20%@120Vac(30-100 %) full load | |
| <20%@230Vac(60-100 %) full load | <20%@230Vac(60-100 %) full load | ||
| AC Current(max) | 0.44A@120Vac full load | 0.27A@120Vac full load | |
| 0.21A@230Vac full load | 0.12A@230Vac full load | ||
| Standby power | <1W | <1W | |
| Inrush Current (cold engine start)max | 120Vac 20A peak,500us duration(10% Ipeak) | 120Vac 20A peak,500us duration(10% Ipeak) | |
| 230Vac 28A peak,600us duration(10% Ipeak) | 230Vac 28A peak,600us duration(10% Ipeak) | ||
| Leakage current(max) | <0.5mA@230Vac | <0.5mA@230Vac | |
| MODEL | EX04-SLPR40-42M | EX04-SLPR20-42M | |
| Output | Current(mA)/Voltage (VDC) Power(W) | 24-42Vdc/850mA/40W | 24-42Vdc/430mA/20W |
| Current ripple | <5% | <5% | |
| Channel | Single channel | Single channel | |
| Linear Regulation | ±5% | ±5% | |
| No-load output voltage | <48Vdc | <48Vdc | |
| Start Time | <0.5S@230Vac <1S@120Vac | <0.5S@230Vac <1S@120Vac | |
| Protection | Over Temperature | When temperature is too high,shut down the output, return to normal after release | |
| Over load | The on-load voltage is too high to enter the protection. return to normal after release | ||
| Short Circuit | Enter hiccup mode and return to normal after release | ||
| Safety standard | IEC60079-0、IEC60079-18 | ||
| EMC | Compliance to BS EN/EN55015 | ||
| Operating Temperature | -40~+70℃ | ||
| Storage Temperature,Humidity | -40°C to 85°C,10-95%RH | ||
| Warranty Tc | 50000Hour (s)@TC:<75℃ | ||
| Surge protection | L-N 6KV | ||
| IP Rating | IP66 | ||
| Weight (g) | |||
| Note | As a part of the terminal equipment system, the LED driver must be combined with the whole lamp system for EMC final confirmation. | ||





Product Wiring:One side is the AC input terminal, and the other side is the DC output terminal. The 18# brown/blue wires are connected to AC/L and AC/N respectively, while the 18# red/black wires are connected to the positive and negative terminals of the LED light accordingly.

| Series | Number of Outputs | Wide Input Voltage | Drive Appearance | Output Power | Output Voltage | Dimming Function |
| EX04 | -S = Single channel | LPR = AC100~240V (DC140~250V) | No = Drive is square | 40 = 40W | -42 = 42V | M = Multiple Control Functions |
| 20 = 20W | No = NO Additional Function |
Previous Page
Next page
Previous Page
Next page
Related Products
undefined
Message
*Leave your contact information to get a free product quote