EX03-SLPR100

EX03-SLPR100 series is a 100W AC/DC LED driver featuring constant current output.EX03-SLPR100 operates from 90–264Vac with different rated output voltages ranging between 24V and 54Vdc. Thanks to the high efficiency up to 91%, with the fanless design, the entire series can operate at -40℃~+70℃ case temperature under free air convection. The entire series is rated at lP66 ingress protection level and is suitable for a variety of applications at dry, damp or wet locations

Key words:

数据1 数据2 数据3 数据4
EX03-SLPR100
+
  • EX03-SLPR100
 
Features
  • Constant Current mode output
  • Plastic housing with Class ll design
  • lP66 rating for indoor or outdoor installations
  • Typical lifetime>50000 hours
  • 5 years warranty

Standard Specification

MODELEX03-SLPR100-54MEX03-SLPR75-54MEX03-SLPR50-54M
INPUTVoltage  Range100 ~ 240Vac  (90-264Vac)100 ~ 240Vac   (90-264Vac)100 ~ 240Vac   (90-264Vac)
140 ~ 250Vdc 140 ~ 250Vdc 140 ~ 250Vdc 
Frequency Range50/60Hz(47~63Hz)       50/60Hz(47~63Hz)50/60Hz(47~63Hz)
Power Efficiency89.0%@120Vac full load88.0%@120Vac full load87.0%@120Vac full load
90.0%@230Vac full load89.0%@230Vac full load87.0%@230Vac full load
Power Factor>0.9@120Vac/60Hz(15-100 %) full load>0.9@120Vac/60Hz(15-100 %) full load>0.9@120Vac/60Hz(15-100 %) full load
>0.9@230Vac/50Hz(60-100 %) full load>0.9@230Vac/50Hz(60-100 %) full load>0.9@230Vac/50Hz(60-100 %) full load
Total Harmonic Distortion<20%@120Vac(30-100 %) full load<15%@120Vac(30-100 %) full load<15%@120Vac(30-100 %) full load
<20%@230Vac(60-100 %) full load<15%@230Vac(60-100 %) full load<15%@230Vac(60-100 %) full load
AC Current(max)                   1.13A@120Vac full load0.87A@120Vac full load0.60A@120Vac full load
0.54A@230Vac full load0.42A@230Vac full load0.31A@230Vac full load
Standby power<1W<1W<1W
Inrush Current                (cold engine start)max120Vac 20A peak,500us duration(10% Ipeak)120Vac 20A peak,500us duration(10% Ipeak)120Vac 20A peak,500us duration(10% Ipeak)
230Vac 28A peak,600us duration(10% Ipeak)230Vac 28A peak,600us duration(10% Ipeak)230Vac 28A peak,600us duration(10% Ipeak)
Leakage current(max)<0.5mA@230Vac<0.5mA@230Vac<0.5mA@230Vac
MODELEX03-SLPR100-54MEX03-SLPR75-54MEX03-SLPR50-54M
OutputCurrent(mA)/Voltage (VDC) Power(W)24-54Vdc/2000mA/100W24-54Vdc/1500mA/75W24-54Vdc/1000mA/50W
Current ripple<5%<5%<5%
ChannelSingle channelSingle channelSingle channel
Linear Regulation±5%±5%±5%
No-load output voltage<60Vdc<60Vdc<60Vdc
Start Time<0.5S@230Vac   <1S@120Vac<0.5S@230Vac   <1S@120Vac<0.5S@230Vac   <1S@120Vac
ProtectionOver TemperatureWhen temperature is too high,shut down the output, return to normal after release 
Over loadThe on-load voltage is too high to enter the protection. return to normal after release 
Short CircuitEnter hiccup mode and return to normal after release 
Safety standardIEC60079-0、IEC60079-18 
EMCCompliance to BS EN/EN55015 
Operating Temperature-40~+70℃ 
Storage Temperature,Humidity-40°C to 85°C,10-95%RH 
Warranty Tc50000Hour (s)@TC:<75℃ 
Surge protectionL-N 6KV    
IP RatingIP66 
Weight (g)  
NoteAs a part of the terminal equipment system, the LED driver must be combined with the whole lamp system for EMC final confirmation.
Electrical Curve Diagram

Dimension Diagram

Product Wiring:One side is the AC input terminal, and the other side is the DC output terminal. The 18# brown/blue wires are connected to AC/L and AC/N respectively, while the 18# red/black wires are connected to the positive and negative terminals of the LED light accordingly.

Product Lable
Ordering Information
List of SKU Naming: EX03-SLPR100-54M
SeriesNumber of OutputsWide Input VoltageDrive AppearanceOutput PowerOutput VoltageDimming Function
EX03-S = Single channelLPR = AC100~240V (DC140~250V)No = Drive is square100 = 100W-54 = 54VM = Multiple Control Functions
    75 = 75W No = NO Additional Function
    50 = 50W  
 

Previous Page

Next page

Previous Page

Next page

Related Products

undefined

undefined

Message

*Leave your contact information to get a free product quote

SAFER-Ex