SP04-SLP100

SP04-SLP100 series is a 100W AC/DC LED driver featuring constant current output.SP04-SLP100  operates from 90–264Vac with different rated output voltages ranging between 24V and 54Vdc. Thanks to the high efficiency up to 91%, with the fanless design, the entire series can operate at -40℃~+70℃ case temperature under free air convection. The entire series is rated at lP66 ingress protection level and is suitable for a variety of applications at dry, damp or wet locations

Key words:

数据1 数据2 数据3 数据4
SP04-SLP100
+
  • SP04-SLP100
 
Features
  • Constant Current mode output
  • Plastic housing with Class ll design
  • lP66 rating for indoor or outdoor installations
  • Typical lifetime>50000 hours
  • 5 years warranty

Standard Specification

MODELSP04-SLP100-54M 
INPUTVoltage  Range100 ~ 240Vac  (90-264Vac) 
140 ~ 250Vdc  
Frequency Range50/60Hz(47~63Hz)        
Power Efficiency89.0%@120Vac full load 
91.0%@230Vac full load 
Power Factor>0.9@120Vac/60Hz(15-100 %) full load 
>0.9@230Vac/50Hz(60-100 %) full load 
Total Harmonic Distortion<20%@120Vac(30-100 %) full load 
<20%@230Vac(60-100 %) full load 
AC Current(max)                   1.17A@120Vac full load 
0.56A@230Vac full load 
Standby power<1W 
Inrush Current                (cold engine start)max120Vac 20A peak,500us duration(10% Ipeak) 
230Vac 28A peak,600us duration(10% Ipeak) 
Leakage current(max)<0.5mA@230Vac 
MODELSP04-SLP100-54M 
OutputCurrent(mA)/Voltage (VDC) Power(W)24-54Vdc/2000mA/100W 
Current ripple<5% 
ChannelSingle channel 
Linear Regulation±5% 
No-load output voltage<60Vdc 
Start Time<0.5S@230Vac   <1S@120Vac 
ProtectionOver TemperatureWhen temperature is too high,shut down the output, return to normal after release
Over loadThe on-load voltage is too high to enter the protection. return to normal after release
Short CircuitEnter hiccup mode and return to normal after release
Safety standardIEC60079-0、IEC60079-18
EMCCompliance to BS EN/EN55015
Operating Temperature-40~+70℃
Storage Temperature,Humidity-40°C to 85°C,10-95%RH
Warranty Tc50000Hour (s)@TC:<75℃
Surge protectionL-N 6KV   
IP RatingIP66
Weight (g) 
NoteAs a part of the terminal equipment system, the LED driver must be combined with the whole lamp system for EMC final confirmation.
Electrical Curve Diagram

Dimension Diagram

Product Wiring:One side is the AC input terminal, and the other side is the DC output terminal. The 18# brown/blue wires are connected to AC/L and AC/N respectively, while the 18# red/black wires are connected to the positive and negative terminals of the LED light accordingly.

Product Lable
Ordering Information
List of SKU Naming: SP04-SLP100-54M
SeriesNumber of OutputsWide Input VoltageDrive AppearanceOutput PowerOutput VoltageDimming Function
SP04-S = Single channelLP = AC100~240V (DC140~250V)No = Drive is square100 = 100W-54 = 54VM = Multiple Control Functions
      No = NO Additional Function
 

Previous Page

Next page

Previous Page

Next page

Related Products

undefined

undefined

Message

*Leave your contact information to get a free product quote

SAFER-Ex